Mutagenicity- and pollutant-emission factors of pellet-fueled gasifier cookstoves: Comparison with other combustion sources

Abstract Emissions from solid-fuel burning cookstoves are associated with 3 to 4 million premature deaths annually and contribute significantly to impacts on climate. Pellet-fueled gasifier stoves have some emission factors (EFs) approaching those of gas-fuel (liquid petroleum gas) stoves; however, their emissions have not been evaluated for biological effects. Here we used a new International Organization for Standardization (ISO) testing protocol to determine pollutant- and mutagenicity-EFs for a stove designed for pellet fuel, the Mimi Moto, and for two other forced-draft stoves, Xunda and Philips HD4012, burning pellets of hardwood or peanut hulls. The Salmonella assay-based mutagenicity-EFs (revertants/megajouledelivered) spanned three orders of magnitude and correlated highly (r = 0.99; n = 5) with EFs of the sum of 32 particle-phase polycyclic aromatic hydrocarbons (PAHs). The Mimi Moto/hardwood pellet combination had total-PAH- and mutagenicity-EFs 99.2 and 96.6% lower, respectively, compared to data published previously for the Philips stove burning non-pelletized hardwood, and 100 and 99.8% lower, respectively, compared to those of a wood-fueled three-stone fire. The Xunda burning peanut hull pellets had the highest fuel energy-based mutagenicity-EF (revertants/megajoulethermal) of the pellet stove/fuel combinations tested, which was greater than that of diesel exhaust, a known human carcinogen, and was between that of open burning of oil and a wood-fueled three-stone fire. Although the Mimi Moto burning hardwood pellets had the lowest fuel energy-based mutagenicity-EF, this value was between that of utility coal and utility wood boilers. This advanced stove/fuel combination has the potential to greatly reduce emissions in contrast to a traditional stove, but adequate ventilation is required to approach acceptable levels of indoor air quality.