Hierarchical control for the start-up procedure of solar thermal fields with direct storage

2020 
Abstract Thermal energy storage tanks are habitually combined with solar thermal fields to improve the dispatchability of these facilities. From the dynamical point of view, the start-up phase is relevant since if the storage device is unloaded in terms of energy or widely stratified, the transitory regime can take long time until reaching the operating point. In this paper, an optimal real-time procedure based on a hierarchical controller for improving the start-up phase is proposed. The hierarchical controller is composed of two layers based on a Model Predictive Control (MPC) technique and Proportional Integer Derivative (PID) controllers. Real experimental tests were performed in a pilot facility located at Plataforma Solar de Almeria (Almeria, Spain). In addition, a comparison in simulation with the typical manual procedure and with two techniques proposed previously in the literature for the same plant is provided. The results demonstrate the benefits obtained by using the proposed method; since it reduces the start-up phase in 34 [min] in comparison with the manual operation, and in 26 and 6 [min] with respect to the two previous techniques.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    41
    References
    4
    Citations
    NaN
    KQI
    []