Performance Analysis Using Physical Layer Abstraction Modeling for 5G and beyond Waveforms

Physical layer abstraction (PLA) is commonly used in system level evaluations to speed up simulations. The accuracy of such evaluations highly depends on the modelling of PLA. Therefore, the main objective of this paper is to model and evaluate the performance of 5G and beyond (5GB) waveforms using PLA techniques. In the existing literature, PLA techniques were mainly used for orthogonal frequency division multiplexing (OFDM), which is commonly used to improve the performance under frequency selective fading. However, it suffers from high peak to average power ratio (PAPR). Therefore, to overcome this, DFT-spread- OFDM (DFT-s-OFDM) is used for uplink communication in the LTE/NR. In future use cases such as vehicle-to-everything (V2X), where high mobility is involved, inter-carrier interference becomes a bottleneck for above waveforms. Therefore, new waveforms are being proposed such as orthogonal time frequency space (OTFS). In the OTFS, data symbols are localized in delay-Doppler domain, and hence delay-Doppler channel impairments (due to mobility) can be easily compensated. To evaluate and compare the performance of above waveforms, we proposed waveforms specific PLA techniques. The proposed PLA techniques are validated though full PHY simulations, and used to compare the performance of different waveforms under frequency selective and doubly selective channels.