Determination of the temperature dependency of the electrical parameters of CIGS solar cells

Two types of Cu(In,Ga)Se2 (CIGS) solar cells, both designed for implementation in CIGS modules, were subjected to temperatures between 25 oC and 105 oC. Simultaneous exposure to AM1.5 illumination allowed the measurement of their electrical parameters at these temperatures. These two types of solar cells, produced with different deposition routes on soda lime glass (SLG) and polyimide (PI) substrates, showed large variations in the temperature dependency of their electrical parameters. It was shown that the temperature dependency of the open circuit voltage (Voc) was dependent on its room temperature value: a high Voc at 25 °C led to a slower loss of Voc when the temperature was increased. For the Voc, the normalised temperature dependency varied between −0.28%/°C and −0.47%/°C, which is in agreement with the literature. The temperature dependency of the short circuit current density (Jsc) showed more surprising results: while the PI samples had the expected positive temperature dependency (0.03 to 0.32...