High performance liquid chromatographic determination of cyanuric acid in human urine and pool water.

: A reverse phase high performance liquid chromatographic (HPLC) assay for the quantitative determination of cyanuric acid (CA) in urine and water is described. For purification, samples are passed through a pre-activated reverse phase C18 column. The effluent is dried by lyophilization, and the residue is reconstituted in hexane-washed water and then passed through a prewashed Dowex-1 column. The effluent is again dried by lyophilization, and the dry residue is extracted with hot dioxane. The solution is cooled to ambient temperature and centrifuged. The supernatant liquid is removed, dried under a nitrogen steam, and dissolved in water for final extraction by reverse phase chromatography. This effluent is dried, dissolved in the sodium phosphate monohydrate in methanol (pH 7.0) mobile phase, and injected into a pre-equilibrated chromatographic system. An external standard is used for quantification by peak height comparison. A sample of HPLC column effluent is collected, dried, dissolved in methanol, and used for mass spectrometric confirmation by a solid probe insert procedure. Average combined recovery determined at 1.0, 5.0 and 10.0 micrograms CA/mL is 103 +/- 3% with an average coefficient of variation of 8.6%. Standard deviations for the 3 concentration levels are 0.04, 0.58, and 0.76, respectively, with average precisions of 4.28, 10.92, and 7.61%. The limits of detection are approximately 0.05 micrograms/mL for urine and 0.1 micrograms/mL for swimming pool water. Recorder response to CA is linear over the concentration range 1-10 microgram/mL.