Adult femur CT modeling and 3D automatic measurement of anatomical parameters

Objective To reconstruct a 3D model from adult femur CT scan data and automate a measurement of femoral anatomical parameters to study the characteristics of Chinese femur anatomical parameters. Methods Using Mimics17.0, models from the CT data of 148 adult patients were established. The completed model was imported into Geomagic Studio and the anatomical landmarks of the femur were extracted to establish 3D coordinate system and unified coordinate system. Programmed with Matlab, using the nearest point iterative ICP algorithm and the 3D automatic extraction algorithm of anatomical landmarks to provide precision positioning, the femoral anatomical parameters were automatically measured and analyzed. The data were compared by using independent sample t test. Results In this group, the diameter of the male femoral condyle was (84.1±3.6) mm, and it was (74.8±3.3) mm in the female; the anteroposterior diameter of the male femoral condyle was (66.5±3.7) mm, and it was (61.2±3.5) mm in the female; the diameter of the male ball head was (48.8±2.1) mm and it was (43.4±2.2) mm in the female; the differences between the two genders were all statistically significant (t=16.21, 8.84, 15.20, all P 0.05). As the height growed, most of the anatomical parameters increased accordingly. Conclusions The 3D automatic measurement of femoral anatomical parameters is more reproducible and accurate than manual measurement. It is necessary to establish and enrich the femoral anatomical database to design and develop internal fixation products that meet the needs of Chinese people. Key words: Femur; Clinical anatomy; Automatic measurement; Prosthesis design