Effect Of Cold Rolling On Microstructural Properties Of Spray Deposited Al-%18Pb And Al-%22Pb Alloys

Abstract Al-%18 Pb and Al-%20Pb alloys were obtained by spray deposition method to obtain the Gaussian shape and fine grain microstructure. In the present study Al-20%Pb and Al-22%Pb were obtained in the form of disc shape spray castings and their s, microstructural properties were studied before and after cold rolling and compared. It was observed that the shape of spray uniform at 300 inclination angles and required shape was obtained at 00 inclination angles of rotor. It has been observed microstructure of Pb particles distributed equally in Al matrix than cast alloys after rolling.