Uncooled infrared detector with 12μm pixel pitch video graphics array

Uncooled infrared detectors with 12μm pixel pitch video graphics array (VGA) have been developed. To improve the signal to noise ratio (SNR) for 12μm pixel pitch, a highly sensitive bolometer material, an advanced pixel structure for thermal isolation and a newly designed read-out IC (ROIC) have been also developed. The bolometer material has been improved by using vanadium niobate. Over a wide range of temperature, temperature coefficient of resistance (TCR) is achieved higher level than -3.6%/K, which is 2 times higher than that for the conventional bolometer material. For thermal isolation, thermal conductance (Gth) value for the new pixel structure, fabricated by using triple level sacrificial layer process, is estimated to be 5nW/K, which is 1/5 times lower than that for the conventional pixel structure. On the other hand, since the imaging area is reduced by the pixel pitch, the uniformity of pixel can be improved. This enables to remove the non-uniformity correction (NUC) circuit in the ROIC. Removal of this circuit is effective for low power and low noise. This 12μm pixel pitch VGA detector is packaged in a compact (24 × 24 × 6.5 mm) and lightweight (11g) ceramic package. In addition, it has been incorporated in a newly developed prototype miniature imager. The miniature imager has dimension of 25(H) ×25(W) ×28(L) mm and weight of 30g. This imager is compact and small enough to fit in your hand. Hereafter, this imager is greatly expected to be applied to mobile systems.