Hydrogen Sensing Performance of ZnO Schottky Diodes in Humid Ambient Conditions with PMMA Membrane Layer

Enhanced hydrogen sensing performance of Pt Schottky diodes on ZnO single crystal wafers in humid ambient conditions is reported using a polymethylmethacrylate (PMMA) membrane layer. ZnO diode sensors showed little change in forward current when switching to wet ambient H2 conditions with 100% relative humidity. This sensitivity drop in the presence of water vapor can be attributed to surface coverage of hydroxyl groups on the Pt surface in humid ambient conditions. The hydrogen sensitivity of PMMA-coated diode sensors recovered up to 805% in wet H2 ambient conditions at room temperature. The PMMA layer can selectively filter water vapor and allow H2 molecules to pass through the membrane layer. It is clear that the PMMA layer can effectively serve as a moisture barrier because of low water vapor permeability and its hydrophobicity. In both dry and wet conditions, ZnO diodes exhibited relatively fast and stable on/off switching in each cycle with good repeatability.