PWM Control Scheme For Quasi-Switched-Boost Inverter to Improve Modulation Index

The simple boost control (SBC) method is usually used to control the shoot-through state in a single-phase single-stage quasi-switched boost inverter (qSBI). This paper proposes a new pulse-width modulation (PWM) control scheme to improve the modulation index for the qSBI. The advantages of the proposed method for the qSBI over the conventional SBC method are as follows: 1) the modulation index is larger; 2) the voltage stress on the capacitor, diodes, and switches is reduced significantly; 3) the high-frequency peak-to-peak inductor current and capacitor voltage ripples are smaller; 4) the shoot-through current is lower; and 5) the efficiency is higher. The operating principles and circuit analysis for the proposed PWM control scheme are shown. To verify the performance of the proposed PWM control method, a 400W prototype was built with a 110 V/50 Hz output voltage. The experimental results matched those of the theoretical analysis.