УДОСКОНАЛЕННЯ ТЕХНОЛОГІЧНИХ ПРОЦЕСІВ СТИКУВАННЯ У ФАСАДНИХ ТЕПЛОІЗОЛЯЦІЙНИХ СИСТЕМАХ

In order to establish the structural deficiencies of technological systems analysis of the existing organizational and technological solutions for placement of insulation in a typical process maps and technical solutions for reconstruction of different brands has been performed. The aim is to identify the main shortcomings of the existing thermal insulation systems and the development of organizational and technological solutions for facades which will minimize these deficiencies by improving mounting system of plate insulation materials. For the experimental confirmation of the leak heat out of insulation plaster systems thermal imaging examination was held in one of the buildings in Zaporizhzhya, which showed that in areas of coupling and fastening with dowels of insulation sheets thermograms temperature at 1.5...2 °C higher than the solid polystyrene sheets, that means that cold bridges is formed in these places. To eliminate thermal bridges technology we offered a hidden fastening system of insulation materials, the essence of which is to hide all fasteners and coupling places between the plates in body insulation. That means that cold places will be recessed into the body of insulation and covered with a second layer of insulation material. Three sizes of insulated panels for hidden mounting systems are proposed, the usage of which will increase technological improvement effect of about 15% with insignificant complexity. The arrangement technology of insulation materials with the use of concealed fasteners is developed, it increases the technological reliability of thermal insulation plaster.