Mixer-settler를 이용한 용매추출로 에칭폐액로부터 철과 니켈의 분리
2004
Solvent extraction and stripping experiments were conducted to separate iron from a spent FeC13 etching solution containing nickel. In the operation of mixer-settler, 7 extraction stages with 1.0 M Alamine336 in toluene, led to 98% extraction percentage of iron at equal phase ratio, when the flow rate of organic and aqueous were 35 mL/min and 5 mL/min, respectively. At equal phase ratio of aqueous to organic, 10 stripping stages with 0.01 M HC1 solution resulted in 99% stripping percentage of iron when the flow rate of stripping solution and loaded organic were 5 mL/min and 35 mL/min, respectively. The concentration of iron in the stripped solution was 133 g/L and this solution could be reused in the etching of nickel lead frame. (Received June 15, 2004)
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI