Tribological Properties of Ti-Al Alloy Self-Lubricating Composite Materials

A series of Ti-48Al-2Cr-2Nb/62%BaF2-38%CaF2 (CB) self-lubricating composites with addition of different weight percentage of solid lubricant were prepared by vacuum hot pressing sintering. Sliding wear tests against 45#steel were performed on the specimen in dry conditions, worn morphology was observed by the scanning electron microscope (SEM). The test results show that when addition of solid lubricant weight percentage is 10%, the worn surface of the composites is most smooth.The main wear mechanisms of Ti-48Al-2Cr-2Nb/62%BaF2-38%CaF2 composite are abrasive wear and adherent wear.