Effect of experimental primers on hydrolytic stability of resin zirconia bonding

AbstractThis study assessed the effect of experimental silane primers and two adhesive resin cements on resin zirconia adhesion strength. The surfaces of cut Y-TZP zirconia blocks (Lava™ Frame), 16 mm × 16 mm × 4.5 mm, were pretreated twice. First, they were grit-blasted with Korox™ alumina powder (110 μm) followed by silica-coating with Rocatec™ Soft. Next, the blocks were randomly assigned into eighteen sub-groups (n = 6, N = 108) according to three primers (control ESPE Sil™, 1.0 vol.-% 3-acryloxypropyltrimethoxysilane, and 1.0 vol.-% 3-acryloxypropyltrimethoxysilane + 0.5 vol.-% bis-12-(triethoxysilyl)ethane), two in dentistry used resin cement products (Multilink™ Speed, and Multilink™ N), and three storage conditions (24 h dry, 1 month immersed in distilled water, and 6 months immersed in distilled water at room temperature) used. Onto each pretreated zirconia block, four cylindrical resin composite cement stubs were prepared and light-cured. The surface roughness, contact angle, and adhesion (shear...