Towards a Clinical Implementation of Measuring the Elastic Modulus of the Aorta from Cardiac Computed Tomography Images

Objective The elasticity of the aortic wall varies depending on age, vessel location, and the presence of aortic diseases. Noninvasive measurement will be a powerful tool to understand the mechanical state of the aorta in a living human body. This study aimed to determine the elastic modulus of the aorta using computed tomography images. Methods We constructed our original formulae based on mechanics of materials. Then, we performed computed tomography scans of a silicon rubber tube by applying four pressure conditions to the lumen. The segment elastic modulus was calculated from the scanned images using our formulae. The actual modulus was measured using a tensile loading test for comparison. Results The segment moduli of elasticity from the images were 0.525 [0.524, 0.527], 0.524 [0.520, 0.524], 0.520 [0.515, 0.523], and 0.522 [0.516, 0.532] (unit: MPa, median [25%, 75% quantiles]) for the four pressure conditions, respectively. The corresponding measurements in the tensile test were 0.548 [0.539, 0.566], 0.535 [0.528, 0.553], 0.526 [0.513, 0.543], and 0.523 [0.508, 0.530], respectively. These results indicated errors of 4.2%, 2.1%, 1.1%, and 0.2%, respectively. Conclusion Our formulae provided good estimations of the segment elastic moduli of a silicon rubber tube under physiological pressure conditions using the computed tomography images. Significance In addition to the elasticity, the formulae provide the strain energy as well. These properties can be better predictors of aortic diseases. The formulae consist of clinical parameters commonly used in medical settings (pressure, diameter, and wall thickness).