Transseptal use of high-density grid catheter for VT mapping and retrograde hemodynamic support with Impella pump in presence of Mitraclips

We sought to establish the technical feasibility of VT-mapping with high-density catheters in patients with Mitraclips, requiring a hemodynamic support. A 73-year-old man with ischemic cardiomyopathy and reduced left ventricular ejection fraction (LVEF ~ 20%) was presented due to syncope and adequate shock of his ICD. Due to severe mitral valve regurgitation (MR), two Mitraclips were implanted earlier. The decision for catheter ablation was made in line with current guidelines. Given the increased PAAINESD score, the use of hemodynamic support was required. To employ an Impella pump via the retrograde transaortic approach, LV-mapping and VT-ablation were necessary to be performed via the transseptal approach, which was challenging due to the presence of Mitraclips. The MV passage with the steerable sheath was guided by a quadripolar catheter and 3D transoesophageal echo (TEE). After the 12F steerable sheath had passed the MV, the quadripolar catheter was exchanged by a high-density (HD) Grid® catheter. Hereafter, the Impella pump was placed retrogradely in the LV, and voltage-mapping of the LV and ablation was performed. At the end of the procedure, the Impella pump could be removed in stable hemodynamic conditions. The follow-up after 3, 6, and 12 months showed no new VT episodes. This case demonstrates the feasibility of the transseptal approach of VT mapping used HD Grid catheter and retrograde hemodynamic support with Impella Pump for VT treatment in patients after Mitraclips implantation. To avoid a damage of the MV and Mitraclips, 3D-TEE is advisable.