SUMMERTIME CONCENTRATIONS AND EMISSIONS OF HYDROGEN SULFIDE AT A MECHANICALLY VENTILATED SWINE FINISHING BUILDING
2002
Hydrogen sulfide (H2S) concentration and emission at a modern mechanically ventilated swine finishing building
with a deep pit were continuously measured for three summer months. Ventilation rates, temperatures, and pig inventory in
the building were also continuously measured or recorded. A total of 88 d of valid data were obtained between 26 June and
25 September, during which the average daily mean (ADM) ambient temperature was 21.8 C. The test began with 887, 19–kg
pigs in the building and ended with 874, 83–kg pigs. Hydrogen sulfide was measured with a sulfur dioxide (SO2) analyzer
equipped with a thermal oxidizer that converted H2S to SO2. Building ventilation rates were determined by continuously
monitoring exhaust fan operation and differential static pressure. Daily mean building H2S concentrations ranged from 38
to 536 ppb. The ADM building concentration (average of three locations) was 173 21 ppb (mean 95% confidence interval).
The maximum concentration, averaged over 7– or 12–min sampling periods, was 1,624 ppb. The 25 th , 50 th (median), and 75 th
percentile values were 413, 527, and 662 g/d for daily mean building H2S emission and 4.4, 5.8, and 12.4 g d –1 AU –1 (animal
unit = 500 kg live mass present in the building) for daily mean specific emission, respectively. These H2S emissions were much
greater than emissions measured or estimated in previous studies. Based on daily means, H2S concentration was inversely
proportional (P < 0.05) to ventilation rate (r = –0.68), whereas building H2S emission was influenced somewhat (P < 0.05)
by building temperature (r = 0.29) and ventilation rate (r = 0.23).
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
15
References
28
Citations
NaN
KQI