A Dopant Replacement-Driven Molten Salt Method toward the Synthesis of Sub-5-nm-Sized Ultrathin Nanowires.

: The high-temperature molten-salt method is an important inorganic synthetic route to a wide variety of morphological phenotypes. However, its utility is limited by the fact that it is typically incapable of producing ultrathin (<5 nm diameter) nanowires, which have a crucial role in novel nanotechnology applications. Herein, a rapid molten salt-based synthesis of sub-5-nm-sized nanowires of hexagonal tungsten oxide (h-WO3 ) that is critically dependent on a substantial proportion of molybdenum (Mo) dopant is described. This dopant-driven morphological transition in tungsten oxide (WO3 ) may be attributable to the collapse of layered structure, followed by nanocluster aggregation, coalescence, and recrystallization to form ultrathin nanowires. Interestingly, due to the structural properties of h-WO3 , the thus-formed ultrathin nanowires are demonstrated to be excellent photocatalysts for the production of ammonia (NH3 ) from nitrogen (N2 ) and water. The ultrathin nanowires exhibit a high photocatalytic NH3 -production activity with a rate of 370 µmol g-1 h-1 and an apparent quantum efficiency of 0.84% at 420 nm, which is more than twice that obtained from the best-performing Mo-doped W18 O49 nanowire catalysts. It is envisaged that the dopant replacement-driven synthetic protocol will allow for rapid access to a series of ultrathin nanostructures with intriguing properties and increase potential applications.