Next Generation High Power Electronic Modules Based on Embedded Power Semiconductors

The spectrum of conventional power electronics packaging reaches from SMD packages for power chips to large power modules. In most of these packages the power semiconductors are connected by bond wires, resulting in large resistances and parasitic inductances. Power chip packages have to carry semiconductors with increasing current densities. Conventional wire bonds are limiting their performance. Today's power modules are based on DCB (Direct Copper bonded) ceramic substrates. IGBT switches are mounted onto the ceramic and their top side contacts are connected by thick Al wires. This allows one wiring layer only and makes an integration of driver chips very difficult. Additionally bond wires result in a high stray inductance which limits the switching frequency. Especially for the use of ultra-fast switching semiconductors, like SiC and GaN, it is very difficult to realize low inductive packages. The embedding of chips offers a solution for many of the problems in power chip packages and power modules. W...