Elimination of the gate and drain bias stresses in I–V characteristics of WSe2 FETs by using dual channel pulse measurement

Intrinsic transfer and output characteristics of WSe2 field effect transistors are obtained by adopting the dual channel pulsed I–V measurement. Due to the DC gate bias stress during the measurement, a large hysteresis is observed and increased with increasing the sweeping range of the gate bias in the transfer curves. In addition, as a drain bias increases, the drain bias stress during the measurement induces the threshold voltage shift. The output curves measured by a DC method are significantly affected by the drain bias sweeping direction and the previous measurement, which leads to a large error in the analysis. By using the dual channel pulsed I–V measurement with a short turn-on time (10−4 s), a long turn-off time (1 s), and a base voltage (gate and drain bias during turn-off time) of 0 V, hysteretic behaviors caused by the gate bias stress and threshold voltage shift due to the drain bias stress in transfer curves are eliminated. The effect of the drain bias sweeping direction and the previous mea...