Comparison of Two Different Designs of a Scraped Surface Crystallizer for Desalination Effect and Hydraulic and Thermodynamic Numbers

The design of a desalination plant is most important if the desired product purity has to be as high as possible. This is also true for freeze crystallization plants. A correct solid-to-liquid ratio has to be ensured when pressing is used as a post-treatment. Thus, the dependence of the overall plant design on the achieved ice quality but also on different hydraulic and thermodynamic numbers is important. In this research, a scraped screw crystallizer plant is presented and examined for two different screw designs. Experiments with a low initial concentration, as for the usage to desalinate groundwater to gain it as process water, were conducted. Furthermore, solutions with high initial concentrations simulating seawater to produce potable water were used as another set of test solutions. The findings showed that neither of the screw designs is more favorable than the other, but it is important to have a plant design fitting the existing parameters on site.