Thermal neutron calibration method using an intense neutron beam from JRR-3M

Abstract We have developed a thermal neutron calibration method using a reactor produced neutron beam in JRR-3M of the Japan Atomic Energy Agency. Neutron-induced prompt gamma ray analysis has usually been performed in this beam line. Neutron energy distributions with negligible contributions from epithermal neutrons were measured by a time-of-flight method with a chopper made of 6 LiF powder. The thermal neutron flux was determined by a gold foil activation method. We found that the thermal neutron beam in JRR-3M was well suited for calibration, neutron detector development or neutron dosimetry.