Matching radio frequency identification tag compact dipole antennas to an arbitrary chip impedance

A method for matching dipole antennas to capacitive or inductive arbitrary complex impedances is proposed for ultra high frequency radio frequency identification (RFID) tag antenna designs. It can be applied to straight, capacitive-loaded, meander or any small high- Q dipole topology. For this purpose, design stages are provided with the corresponding formulas. The reflection coefficient simulations and measurements of four implemented prototypes show the expected output when the RFID frequency band, bandwidth, chip impedance and maximum tag size are required as inputs for the method. The eventual S 11 les10 dB bandwidth depends on the chip impedance Q factor and the antenna size. How this bandwidth is manifested in terms of the read range is also discussed. A length ratio of up to 31.1% regarding the standard lambda/2 dipole at resonance is obtained.