Determination of Sulfur in Milligram Steel Samples by Cathodic Stripping Voltammetry

1993 
Sulfur at the μg g-1 level in 1-mg steel samples is determined by catholic stripping voltammetry (CSV) with a silver disk electrode, after conversion of the sulfur into hydrogen sulfide followed by its absorption in a 0.2M sodium hydroxide solution. Microscale operations with microliter volumes of solutions are used throughout the entire procedure, except for CSV. Simple apparatus have been devised for a safe treatment with perchloric acid and for the evolution of hydrogen sulfide by reducing with a mixture of hydroiodic and phosphinic acids. The proposed method can be applied to the determination of 60 to 200μg g-1 of sulfur in steels with an RSD of ca. 5% (n=3 to 10). The time required for a determination is less than 2.5h.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    0
    References
    2
    Citations
    NaN
    KQI
    []