Thermal Processing of Chloride-Contaminated Plutonium Dioxide

Over 80 heat treatment experiments have been made on samples of chloride-contaminated plutonium dioxide retrieved from two packages in storage at Sellafield. These packages dated from 1974 and 1980 and were produced in a batch process by conversion of plutonium oxalate in a furnace at around 550 °C. The storage package contained a poly(vinyl chloride) (PVC) bag between the screw top inner and outer metal cans. Degradation of the PVC has led to adsorption of hydrogen chloride together with other atmospheric gases onto the PuO2 surface. Analysis by caustic leaching and ion chromatography gave chloride contents of ∼2000 to >5000 ppm Cl (i.e., μgCl g–1 of the original sample). Although there are some subtle differences, in general, there is surprisingly good agreement in results from heat treatment experiments for all the samples from both cans. Mass loss on heating (LOH) plateaus at nearly 3 wt % above 700 °C, although samples that were long stored under an air atmosphere or preexposed to 95% relative humidi...