efficacy of water chamber type seawall to dissipate incident wave and its performance to extract wave power

This study examined performance a water chamber type of seawall to dissipate incident wave and also extract wave power. The model of water chamber is consists of two water chamber type. The low reflection wave resulted by flow separation in lower end of vertical wall and it occurs after wave resonant condition. This structure is appropriate for short and long wave condition. A horizontal plate was setup in the end of vertical wall in order to improve performance of water chamber type seawall. This trial test taken to dissipate much longer waves condition and it's related to utilize the wave energy inside the water chamber. Additional trial of the cross section, such as an adoption of a bevel edge instead of a right angle edge was also examined. It was seen that the seawall of a water chamber type with a horizontal plate is very effective to reduce reflected waves for both short and long waves. Also it was confirmed that large amplifications of pumping mode wave motions in the two water chambers appear for comparatively wide range of wave frequency