Development of spatially branched woven node structures on the conventional weaving loom

The increasing need of consistent implementation of lightweight constructions in many technical fields makes the manufacture of near net-shaped node structure to be used in textile-reinforced composites a subject of great interest. The manufacture of the node structure is required to provide a strong node point whilst maintaining the circumference of each adjoining strut. Despite a variety of available methods to produce three-dimensional nodal fabric, the required geometry for the complex nodular connection element has not yet been fully achieved. Furthermore, the available methods have limitations. The developed woven concept in this work allows for maintaining the configuration of the node structure and dimensions of the tubes, especially at the node points. As a result, all tubes positioned at node points are fully open; this is accomplished without distorting the surrounding area once the flat woven node structure is removed from the loom and erected into three-dimensional configuration. In order to ...