Influence of Speed of Processing in the Mechanical and Thermomechanical Properties of Polyamide 6 / Organoclay Nanocomposite

The improvement in the properties of nanocomposites is achieved with a load volume fraction of up to 10% due to the very high ratio of the load aspect. Moreover, they have the advantage of being processed with conventional equipment and techniques (extrusion, injection, etc.) used for polymers. In order for the clay to be uniformly dispersed in the polymer and there to be good interaction with the polymer matrix, superficial treatments of the clays with organic salts are essential for it to become organophilic, and, thus the material obtained has better performance. In this study, it was evaluated the influence of two speeds (100 and 200 rpm) of processing and thermo mechanical properties of nanocomposites with 3% of bentonite clay prepared with two speeds and two threads. The nanocomposites showed better properties as compared to properties of polyamide 6, especially the samples heated at screw speed of 100 rpm.