Grain refinement and superplastic behaviour of a modified 6061 aluminium alloy

AbstractThe superplastic properties and microstructure evolution of a 0.15%Zr and 0.7%Cu modified 6061 aluminium alloy were examined in tension at temperatures ranging from 475 to 600°C and strain rates ranging from 7 × 10-6 to 2.8 × 10-2 s-1. The refined microstructure with an average grain size of about 11 μm was produced in thin sheets by a commercially viable thermomechanical process. It was shown that the modified 6061 alloy exhibits a moderate superplastic elongation of 580% in the entirely solid state at 570°C and ϵ = 2.8 × 10-4 s-1. Superior superplastic properties (elongation to failure of 1300% with a corresponding strain rate sensitivity coefficient m of about 0.65) were found at the same strain rate and a temperature of 590°C, which is higher than the incipient melting point of the 6061 alloy (~575°C). The microstructural evolution during superplastic deformation of the 6061 alloy has been studied quantitatively. The presence of a slight amount of liquid phase greatly promotes the superplastic...