Heat dissipation from a stationary brake disc, Part 2: CFD modelling and experimental validations:

Following from the analytical modelling presented in Part 1, this paper details a comprehensive computational fluid dynamics modelling of the three-dimensional flow field around, and heat dissipation from, a stationary brake disc. Four commonly used turbulence models were compared and the shear stress turbulence model was found to be most suitable for these studies. Inferior cooling of the anti-coning disc type is well known but the core cause in static conditions was only now established. The air flow exiting the lower vane channels at the inner rotor diameter changes direction and flows axially over the hat region. This axial flow acts as a blocker to the higher vane inlets, drastically reducing convective cooling from the upper half of the disc. The complexity of disc stationary cooling is further caused by the change of flow patterns during disc cooling. The above axial flow effects slowly vanish as the disc temperatures reduce. Consequently, convective heat transfer coefficients are affected by both,...