In-pile tritium release behaviour of lithiummetatitanate produced by extrusion–spheroidisation–sintering process in EXOTIC-9/1 in the high flux reactor, Petten

Abstract The irradiation programme EXOTIC (extraction of tritium in ceramics) is carried out within the European framework for the development of the helium cooled pebble bed concept. The EXOTIC-9/1 is the latest experiment in the series of EXOTICs that are irradiated in the high flux reactor in Petten. Tritium release and inventory in lithium containing ceramic pebbles are key properties to be tested in a TBM. New production routes of pebbles are developed, leading to different thermomechanical and tritium release properties. The objective of the EXOTIC-9/1 is to study in-pile tritium release behaviour of the latest developed lithiummetatitanate pebbles (Li 2 TiO 3 ). The pebbles are produced by a extrusion–spheroidisation–sintering process at CEA. The new pebbles differ with respect to porosity from the lithiummetatitanate ceramics tested in the previous EXOTIC 8 programme. The pebbles have diameter in the range from 0.6 to 0.8 mm. Irradiation of EXOTC-9/1 started at 24 March 2005, and will continue until the end of 2006, in total about 400 irradiation days. The temperature is varied between 340 and 580 °C. Begin of Life (BOL) tritium production rate is 0.56 mCi/min. Based upon the in-pile tritium release measurements and the analysis of the tritium residence time it can be concluded that tritium release in the new batch of the high density Li 2 TiO 3 pebbles irradiated in EXOTIC 9/1 is rather slow compared to the ceramics irradiated in the EXOTIC 8 irradiation campaign. In this paper, the in-pile tritium behaviour will be reported during normal operation and during transients in temperature, purge gas chemistry and gasflow. The collected data is compared to tritium release data from ceramics irradiated in previous EXOTIC experiments with respect to tritium inventory, residence time and porosity.