Consolidation and compaction as a means to prevent settlement of bentonite/sandy silt mixes for use in waste disposal sites. [Low permeability mixture for caps and lining of waste disposal sites]

The texture of the local Los Alamos tuff is that of a sandy silt with a high hydraulic conductivity. The permeability is dramatically decreased by addition of small amounts of bentonite. The coefficient of consolidation for bentonite/sandy silt ratios decreases inversely proportional with the square of that ratio, whereas the compression index, the swelling index, and the permeability change index increase with increasing bentonite ratio. A strong relationship also exists between the void ratio and the logarithm of the applied stress for any given bentonite ratio. The empirical linear relationship between the void ratio and the logarithm of the applied stress, developed by Taylor, is excellent and enables us to limit the evaluation of conductivity at any void ratio to the measurement of the initial and the desired void ratio, the initial conductivity, and the permeability change index. The decrease in void ratio caused by consolidation or natural compaction of the mixes are scrutinized. Examples of expected settlement and subsidence are calculated based on the known geotechnical characteristics of bentonite/sandy silt mixes. Remedial actions, i.e., means to limit the amount of settlement, are considered. We finally discuss our field experiment, which studies the influence of subsidence on layered systems in general and on biobarriers in particular. 15 refs., 5 tabs.