Optical high-voltage sensor based on fiber Bragg gratings and stacked piezoelectric actuators for ac measurements
2019
In this paper, we present the design and fabrication of a compact, modular optical high-voltage sensor (OHVS) based on fiber Bragg gratings (FBG) for a.c. distribution and transmission lines. The proposed OHVS is composed by a stack of piezoelectric transducers that transfer mechanical strain to a sensing FBG. A prototype was tested in the laboratory and showed a maximum linearity error of less than 3% of full-scale range (FSR) for input voltages up to 14kV
r
m
s
with a signal-to-noise ratio of 55 dB, allowing measurements with a resolution of less than 0.2% of FSR. Transient response of the developed OHVS was preliminarily investigated, and a response time of less than 1 ms was observed. The results obtained allow us to conclude that the developed OHVS may also be used for the detection of transient events.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
16
References
1
Citations
NaN
KQI