Dynamic Crack Initiation And Growth In Cellulose Nanopaper

Cellulose nanopaper (CNP) made of cellulose nanofibrils has gained extensive attention in recent years for its lightweight and superior mechanical properties alongside sustainable and green attributes. The mechanical characterization studies on CNP at the moment have generally been limited to tension tests. In fact, thus far there has not been any report on crack initiation and growth behavior, especially under dynamic loading conditions. In this work, crack initiation and growth in self-assembled CNP, made from filtration of CNF suspension, are studied using a full-field optical method. Dynamic crack initiation and growth behaviors and time-resolved fracture parameters are quantified using Digital Image Correlation technique. The challenge associated with dynamic loading of a thin strip of CNP has been overcome by an acrylic holder with a wide pre-cut slot bridged by edge-cracked CNP. The ultrahigh-speed digital photography is implemented to map in-plane deformations during pre- and post-crack initiation regimes including dynamic crack growth. Under stress wave loading conditions, macroscale crack growth occurs at surprisingly high-speed (600–700 m/s) in this microscopically fibrous material. The measured displacement fields from dynamic loading conditions are analyzed to extract stress intensity factors (SIF) and energy release rate (G) histories. The results show that the SIF at crack initiation is in the range of 6–7 MPa m1/2, far superior to many engineering plastics. Furthermore, the measured values increase during crack propagation under both low- and high-strain rates, demonstrating superior fracture resistance of CNP valuable for many structural applications.