Dynamic back face deformation measurement with a single optical fibre

Abstract A single optical fibre sensor is used to measure the dynamics of an impact. The method consists of sewing the optical fibre onto a woven Kevlar layer and placing it between the shoot pack and backing material. The measurement is accomplished by using the friction between the layer and the optical fibre to relate the optical fibre strain to impact deformation. Tests are done using a backing material of Roma Plastilina No.1 clay, and transparent ballistics gel with independent high-speed imaging. A final calculated BFD average error of 7.75% is presented as well as a timing error of 15.5% between the imaged dynamic BFD and the dynamic BFD determined by the FBG. This method is also tested at the U.S. Army Aberdeen Test Center in Maryland with a final calculated error of 7%.