Smoother Than Smooth: Increasing the Flow Conveyance of an Open-Channel Flow by Using Drag Reduction Methods
2019
The drag reduction method using polymer additives is a common strategy to minimize friction losses when carrying fluids (water, oil, or slurries) in pipes over long distances. Previous studies showed that the interactions between the polymer and turbulent structures of the flow tend to modify the streamwise velocity profile close to the walls by adding a so-called elastic sublayer between the classical viscous and log layers. The gain in linear head losses can reach up to 80% depending on the roughness of the walls and the concentration of polymers. The application of this technique to sewers and the subsequent gain in discharge capacity motivated this work to quantitatively measure the drag reduction in classical open-channel flows. Three measurement campaigns were performed in a dedicated long flume for several water discharges and several polymer concentrations: backwater curves over smooth and rough channel walls (including velocity and turbulent shear-stress profiles) and flows around emerging obstacles. The addition of polymers, even in limited concentrations, allowed a high friction decrease with the typical Darcy-Weisbach coefficient reduced by factors of 2 and 1.5, respectively, in smooth and rough walls configurations without obstacles, but without strong modifications of the nondimensional velocity profiles. In contrast, when adding emerging obstacles, the flow was unaffected by the inclusion of polymers, in agreement with the prediction of the literature. The drag reduction method by addition of small concentrations of polymers thus appears to be a promising technique to increase flow conveyance in open-channel flows.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
1
Citations
NaN
KQI