Influence of hydrogen on the tarnishing film-induced brittle cracking of brass

The effects of hydrogen-charging on tarnishing film-induced brittle cracking of brass were studied. The tarnishing film was generated on brass samples with various hydrogen concentrations in Mattsson’s solution, then removed from the solution, dried, and subjected to a slow loading rate (loading speed = 0.5 mm/min) in air. The results indicated that hydrogen caused the film-induced brittle cracking to be more difficult to occur and a considerably high concentration of hydrogen could inhibit completely the film-induced brittle cracking. Elastic modulus test results showed that elastic modulus of the brass substrate decreased and elastic modulus of the tarnishing film increased with increasing the hydrogen concentration. Hydrogen inhibiting the film-induced cracking can be ascribed to the fact that hydrogen changed the elastic modulus of substrate and film.