New approaches to the development of construction technologies

The paper presents data on the volume of materials consumed by builders and the carbon dioxide emissions that occur during this process. The reasons for the formation and volume of construction debris are considered. Recycling technologies currently used in the demolition of buildings are associated with crushing. The resulting concrete mix is used only for filling low-level earthworks due to the rapid carbonation of concrete surfaces. The scrap metal formed during crushing is used for remelting, polluting the atmosphere and requiring a large amount of energy. It is proved that due to the low economic and environmental efficiency, this method of recycling is a dead end. Studies have found that the constant increase in the strength of concrete and the absence of a decrease in the strength characteristics of reinforcing steels, stone materials, bricks, which are operated for a long time in favorable temperature and humidity conditions, allows them to be reused. General approaches have been developed that require changes in the existing technologies for the renovation of urban areas, the demolition of individual buildings and structures that currently exist. To reduce CO2 emissions and construction debris, it is enough to increase the volume of gentrification, reconstruction, major repairs, and re-profiling of the existing residential and industrial stock. When demolishing buildings, it is necessary to abandon the method of collapse of building structures with their further fragmentation. The method of piecemeal dismantling with repeated use of materials, products and structures (after determining their strength indicators by specialists), allows you to dramatically reduce the problems of construction debris and carbon dioxide emissions.