Preparation of ceramic coatings on inner surface of steel tubes using a combined technique of hot-dipping and plasma electrolytic oxidation

Abstract A new method for inner surface modification of steel tubes, named a combined technique of hot-dipping and plasma electrolytic oxidation (PEO) was proposed and demonstrated in this paper. In this work, metallurgically bonded ceramic coatings on inner surface of steel tubes were obtained using this method. In the combined process, aluminum coatings on steel were firstly prepared by the hot-dip process and then metallurgically bonded ceramic coatings were obtained on the aluminum coatings by PEO. The element distribution, phase composition and morphology of the aluminide layer and the ceramic coatings were characterized by SEM/EDX and XRD. The corrosion resistance of the ceramic coatings were also studied. The results show that, after hot-dip treatment, the coating layers consist of two layers, where Al, Fe x Al (1− x ) were detected from external topcoat to the aluminide/steel substrate. Then after PEO process, uniform Al 2 O 3 ceramic coatings have been deposited on inner surface of steel tubes. The ceramic coatings are mainly composed of α-Al 2 O 3 and γ-Al 2 O 3 phase. The compound coatings show favorable corrosion resistance property. The investigations indicate that the combination of hot-dipping and plasma electrolytic oxidation proves a promising technique for inner surface modification of steel tubes for protective purposes.