Optics-measurement-based Beam Position Monitor calibration
2019
Accurate measurements of the focusing properties of an accelerator are essential for properoperation of a synchrotron, both for the machine protection and for the performance of the experiment. Measurement of linear optics functions based on turn-by-turn measurements has been developed continuously in pursuit of more accurate results [1, 2, 3, 4]. Optics functions that describe the focusing properties of the machine can be obtained from different observables: phase and amplitude of the transverse betatron oscillations and the change of the tune by modulating the current of quadrupoles (K-modulation) [5]. Reconstruction of linear optics using the phase, in combination with K-modulation, have been the main approaches for obtaining the function in accelerators all over the world [3, 6, 7]. Measurements of optics functions based on the amplitude [8], denoted as from amplitude, have not been used as widely as the other methods since it requires accurate beam-position-monitor (BPM) calibration...
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI