Design and Fabrication of Transformable Head Structures for Endoscopic Catheters
2019
We present a transformable catheter head structure for endoscopic catheter allowing the simultaneous use of a camera module and a large tool channel introduced through a small incision. At the site of interest, the head with a camera can be expanded from the initial straight configuration, which opens a window for advancing a tool that is located behind the camera. Two different designs were proposed and prototyped. One option has flexure joints directly fabricated at the distal end of a polymer catheter by laser micro-machining, while another design employs a hinged metal head assembled at the tip of the same type of catheter. The kinematic behavior of each head was evaluated during the head-up and tip steering motions, and compared with each other to draw a selection guideline between them. Experimental results prove the feasibility of the proposed head structure for smarter endoscopic catheters.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
9
References
1
Citations
NaN
KQI