Characteristics of a-SiGe:H Solar Cell with various Thickness Ratio of a-Si:H/a-SiGe:H Layer in the Intrinsic Layer

2013 
In the present work, we have investigated the characteristics of a-SiGe:H solar cell with an optical absorption layer (a-Si:H, a-SiGe:H) between p-layer and n-layer. The characteristics of the fabricated a-SiGe:H solar cells were carried out with a-Si:H and a-SiGe:H according to various thickness in the intrinsic layer. The entire thickness of a-Si:H and a-SiGe:H layers were 2000 A whereas thickness of a-Si:H layer was varied from 50 A to 800 A. Modulating thickness of a-Si:H layer, we verified parameter characteristics of fabricated solar cell such as open-circuit voltage (VOC), short-circuit density current (JSC), fill factor (FF), and conversion efficiency (η) comparing with a-SiGe:H solar cell by using an XEC-301S solar simulator that was composed of a Xenon lamp and AM filter under standard AM 1.5G conditions. Further analysis the UV-VIS Spectrometer and Quantum efficiency (QE) are used to verify the transmittance and absorptance, respectively. It was observed that the higher performances (Voc: 0.54 ...
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    9
    References
    0
    Citations
    NaN
    KQI
    []