Kinetic behavior of heterogeneous populations in completely mixed reactors

The kinetic behavior of heterogeneous microbial populations was studied in a continuous flow completely mixed reactor operated at various dilution rates. Glucose was used as the growth-limiting nutrient. The physiological growth parameters for cells harvested from continuous flow reactors were determined using batch experiments. It, was found that the growth parameters, maximum growth rate (μm), saturation constant (ks), and cell yield (Y) vary for each dilution rate, and cannot be considered as precise constants in depicting the kinetic behavior of heterogeneous populations. In addition, it was found that the yield coefficients obtained from batch experiments were always lower than those obtained from continuous flow experiments. Levels of substrate and biological solids calculated for different dilution rates using growth constants from batch experiments did not agree with the experimental values observed in steady-state experiments. However, when the yield values from, the continuous flow experiments were used in conjunction with batch values for μm and ks the theoretical and experimental dilute-out curves agreed fairly closely (within the range needed for engineering prediction) until the culture began to wash out of the unit. In general, the data substantiated the use of the single phase relationship between growth rate and substrate concentration described by the Monod equation, μ = μmS/(ks + s).