Eating with a saw for a jaw: Functional morphology of the jaws and tooth‐whorl in Helicoprion davisii

The recent reexamination of a tooth-whorl fossil of Helicoprion containing intact jaws shows that the symphyseal tooth-whorl occupies the entire length of Meckel's cartilage. Here, we use the morphology of the jaws and tooth-whorl to reconstruct the jaw musculature and develop a biomechanical model of the feeding mechanism in these early Permian predators. The jaw muscles may have generated large bite-forces; however, the mechanics of the jaws and whorl suggest that Helicoprion was better equipped for feeding on soft-bodied prey. Hard shelled prey would tend to slip anteriorly from the closing jaws due to the curvature of the tooth-whorl, lack of cuspate teeth on the palatoquadrate (PQ), and resistance of the prey. When feeding on soft-bodied prey, deformation of the prey traps prey tissue between the two halves of the PQ and the whorl. The curvature of the tooth-whorl and position of the exposed teeth relative to the jaw joint results in multiple tooth functions from anterior to posterior tooth that aid in feeding on soft-bodied prey. Posterior teeth cut and push prey deeper into the oral cavity, while middle teeth pierce and cut, and anterior teeth hook and drag more of the prey into the mouth. Furthermore, the anterior-posterior edges of the teeth facilitate prey cutting with jaw closure and jaw depression. The paths traveled by each tooth during jaw depression are reminiscent of curved pathways used with slashing weaponry such as swords and knifes. Thus, the jaws and tooth-whorl may have formed a multifunctional tool for capturing, processing, and transporting prey by cyclic opening and closing of the lower jaw in a sawing fashion. J. Morphol. 276:47–64, 2015. © 2014 Wiley Periodicals, Inc.