Design theory and experiment of acousto-optical tunable filter by use of flexural waves applied to thin optical fiber
2008
Spectral response of acoustically induced microbending through thin optical fiber is discussed from mode-coupling of core and cladding modes. The thin fiber is analyzed in three-layered structure (core-cladding-air) to gain insights into acousto-optic modulation. We explained the dependence of core and/or cladding diameters on acoustic source parameters from numerical calculations. According to the calculations, we successfully fabricated all-optical tunable filter using this thin fiber that yields an efficient mode-coupling at flexural wave frequencies less than 1MHz. To increase the acousto-optic effect, we used a specially designed thin optical fiber (80 μm of cladding diameter) in the section where flexural wave is produced, and spliced both ends of the thin fiber to the tapered 125 μm fibers. The frequency and voltage tuning of fabricated filter is also confirmed by changing the driven frequency and applied voltage of the PZT, respectively. This result suggests a possibility of fiber-optic device application as all-optical tunable filter at 1.55 μm.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
20
References
8
Citations
NaN
KQI