A harmonic injection SPWM method for the high-responsive PMSM control system

In a permanent magnet synchronous motor (PMSM) control system, usually, the phase voltage instruction is limited independently to prevent a three-phase pulse width modulation (PWM) wave from overflowing. This method decreases the efficiency of the bus voltage and causes voltage vector direction errors. To solve these problems, we propose a harmonic injection sinusoidal pulse-width modulation (SPWM). This method uses harmonic injected sinusoidal PWM to improve the utilisation ratio of the bus voltage, and consequently improve system performance. In this paper, we analyse the problem in terms of potential difference. The simulation results show that the proposed method can increase the utilisation ratio of the bus voltage up to 15.4%, and the voltage vector mode obtained with the proposed algorithm is larger than that obtained with the conventional one. The method with harmonic injection consequently improves current response, without affecting voltage vector accuracy. The experiment results validate the pr...