NUMERICAL STUDY OF HYDROGEN FUEL COMBUSTION IN COMPRESSION IGNITION ENGINE UNDER ARGON-OXYGEN ATMOSPHERE

Gas emissions from automobiles are one of the major causes of air pollution in our environment today. In fact, emissions of carbon dioxide (CO 2 ), a product of complete combustion, has become a significant factor of the global warming effect. Hydrogen, which is a renewable energy, is regarded as a promising energy to solve this problem since the final product of hydrogen (H 2 ) combustion, is water (H 2 O). However, the reaction of hydrogen fuels in the air under high temperature conditions produces a high volume of harmful nitrogen oxide (NOx). Furthermore, the high auto-ignition temperature of H 2 makes it difficult to ignite in a compression ignition engine in normal air. In this research, argon (Ar) is used to replace nitrogen (N 2 ), in order to eliminate NOx and enhance combustion. Simulation for this research was conducted using Converge, computational fluid dynamics software that is based on Yanmar TF90M compression ignition engine parameters. The simulation process was initially conducted with normal air (N 2 -O 2 ) as the medium of combustion; but later it was replaced with an argon-oxygen (Ar-O 2 ) atmosphere to investigate the ignition possibility of hydrogen fuel. Hydrogen was injected at 9.95 MPa at the start of injection (SOI) at 18o BTDC. The results show that, by employing the same parameters for both simulations in normal air and argon-oxygen mediums, the combustion of hydrogen only occurred in the argon-oxygen medium. However, no combustion took place in normal air. It is therefore concluded that an argon-oxygen medium is applicable for direct hydrogen injection in a compression ignition engine.