Hydrometallurgical enhanced liberation and recovery of anode material from spent lithium-ion batteries.

Abstract The efficient recycling of spent anode material (SAM) from spent lithium-ion batteries (LIBs) is generally critical in terms of electronic waste recyclingas well as increasing resource shortage and environmental problems. This research reported a novel and green method to recycle lithium, copper foil, and graphite from SAM by water leaching treatment. The results indicated that 100% of graphite was exfoliated from the anode material and 92.82% leaching efficiency of lithium was obtained under the optimal conditions of 80 °C, 60 g/L, 300 rpm, and 60 min, respectively. This finding revealed that the SAM got a full liberation characteristic due to the removal of binder, which produced an ideal leaching lithium efficiency rivaling the acids’ performance. The mechanism of the liberation of SAM and lithium leaching is presented based on the analysis of results. The graphite was purified and recovered after water leaching treatment. Besides, lithium was recovered in the form of lithium carbonate (Li2CO3), and the copper foil was recovered in a sheet. This study endeavors to develop an economical and environmentally feasible plan to recycle graphite, copper, and lithium from SAM.