Disk Diffusion Susceptibility Testing for the Rapid Detection of Fluconazole Resistance in Candida Isolates.

Background Given the increased fluconazole resistance (FR) among Candida isolates, we assessed the suitability of disk diffusion susceptibility testing (DDT) for the early detection of FR using well-characterized Candida isolates. Methods In total, 188 Candida isolates, including 66 C. albicans (seven Erg11 mutants), 69 C. glabrata (33 Pdr1 mutants), 29 C. parapsilosis (15 Erg11 mutants), and 24 C. tropicalis (eight Erg11 mutants) isolates, were tested in this study. FR was assessed using DDT according to the standard CLSI M44-ED3 method, except that two cell suspensions, McFarland 0.5 (standard inoculum) and 2.5 (large inoculum), were used, and the inhibition zones were read at 2-hour intervals from 10 hours to 24 hours. Results DDT results for the standard inoculum were readable after 14 hours (C. albicans, C. glabrata, and C. tropicalis) and 20 hours (C. parapsilosis) for >95% of the isolates, whereas the results for the large inoculum were readable after 12 hours (C. glabrata and C. tropicalis), 14 hours (C. albicans), and 16 hours (C. parapsilosis) for >95% of the isolates. Compared with the results produced using the CLSI M27-ED4 broth microdilution method, the first readable results from the DDT method for each isolate exhibited an agreement of 97.0%, 98.6%, 72.4%, and 91.7% for the standard inoculum and 100%, 98.6%, 96.6%, and 95.8% for the large inoculum for C. albicans, C. glabrata, C. parapsilosis, and C. tropicalis, respectively. Conclusions DDT using large inoculum may detect FR rapidly and reliably in the four most common Candida species.