INITIAL TEMPERATURE EFFECTS ON THE SHOCK COMPRESSION AND RELEASE PROPERTIES OF DIFFERENT ALUMINA‐FILLED EPOXY COMPOSITIONS

Alumina‐filled epoxies are composites having constituents with highly dissimilar mechanical properties, resulting in complex behavior during shock compression and release. Two distinguishing characteristics are amplitude‐dependent wave structures and high release wave velocities. Recent studies examined the effects of various compositional changes on these shock properties. As expected, the strongest effects were observed when the total alumina volume fraction was reduced in steps from a nominal 43% to 0%. In the present study, compositions prepared over the same range of alumina loadings were examined at initial temperatures that were nominally −55 °C or 70 °C. Experimental configurations were identical to previous room‐temperature experiments. Laser interferometry and wave timing were used to obtain transmitted wave profiles, Hugoniot states, and release wave velocities. Initial densities were determined from thermal expansion coefficients measured for each composition. Although initial density changes ...